OFDM advantages
- OFDMA can easily adapt to severe channel conditions without the need for complex channel equalisation algorithms being employed
- It is robust when combatting narrow-band co-channel interference. As only some of the channels will be affected, not all data is lost and error coding can combat this.
- Intersymbol interference, ISI is less of a problem with OFDM because low data rates are carried by each carrier.
- Provides high levels of spectral efficiency.
- Relatively insensitive to timing errors
- Allows single frequency networks to be used - particularly important for broadcasters where this facility gives a significant improvement in spectral usage.
- OFDM is sensitive to Doppler shift - frequency errors offset the receiver and if not corrected the orthogonality between the carriers is degraded.
- Sensitive to frequency timing issues.
- Possesses a high peak to average power ratio - this requires the use of linear power amplifiers which are less efficient than non-linear ones and this results in higher battery consumption.
- The cyclic prefix used causes a lowering of the overall spectral efficiency.
- With spectrum becoming more fragmented, especially for systems such as LTE and LTE advanced, fact that OFDMA provides flexibility of deployment across a variety of frequency bands with little need for modification is of paramount importance.
- When used in a cellular system, it is possible to minimise interference from neighbouring cells by using different carrier permutations between the two cells.
- Again when used with a cellular system, interference within the cell are averaged by using allocation with cyclic permutations.
- A single frequency network can be used to provide excellent coverage and good frequency re-use.
- Offers frequency diversity by spreading the carriers all over the used spectrum
OFDMA disadvantages
It has a relatively high sensitivity to frequency offsets as this degrades the orthogonality between the carriers
- It is sensitive to phase noise on the oscillators as this degrade the orthogonaility between the carriers
- Requires complex electronics to run the software - DSP including FFT algorithms needed for the forward error correction. This is always active regardless of data rate, although when no data is being transmitted the system can hibernate. However power consumption can be an issue.
- If only a few carriers are assigned to each user the resistance to selective fading will be degraded or lost.
- When used in a cellular system, co-channel interference from neighbouring cells is more complicated to combat than with CDMA as allocation of carriers needs to be coordinated between the two.
- The fast channel feedback information and adaptive sub-carrier assignment is more complex than CDMA fast power control
OFDM CDMA comparision
OFDM advantages
- OFDM can combat multipath interference with greater robustness and less complexity. Equalisation can be undertaken on a carrier by carrier basis.
- OFDMA can achieve higher spectral efficiency with MIMO than CDMA using a RAKE receiver.
- Cell breathing does not occur as additional users connect to the base station.
- Can be used to provide a single frequency network.
- It is relatively easy to aggregate spectrum.
- It can be scaled according to the requirements relatively easily
- Not as complicated to implement as OFDM based systems
- As CDMA has a wide bandwidth, it is difficult to equalise the overall spectrum - significant levels of processing would be needed for this as it consists of a continuous signal and not discrete carriers.
- Not as easy to aggregate spectrum as for OFDM
参考：http://www.radio-electronics.com/info/rf-technology-design/ofdm/ofdma-cdma.php
No comments:
Post a Comment