ExtremeWireless - BYOD Lab - 5

Wireless Topology Design. 

In this lab, we create tow typologies: VLAN200AP and VLAN200AC.

At VLAN200AP, the traffic will be tagged by the Access Point before entering the network.

At VLAN200AC, the traffic will be tunneled to the Controller.

We could use the following CLI commands by "show topology"

EWC1.wirelessdeom.com# show topology

Name                    Mode      L2:VlanId,tagged,port  L3:IP,GW,DHCP            L3:IPv6,Auto-Generated

Admin                   admin     N/A,N/A,Admin          192.168.1.1,none,N/A     N/A,
Bridged at AP untagged  b@ap      4093,disable,N/A
Physical1               physical  100,disable,esa0       192.168.10.4,none,none
VLAN200AC               b@ac      200,enable,esa0        192.168.20.4,none,relay
VLAN200AP               b@ap      200,enable,N/A

Role Design

We also create two roles - Student and Staff, in this lab.

We could use the following CLI commands by "show role"

EWC1.wirelessdeom.com# show role

Role name        Topology   Class of Service  Mode       Filter defined

Enterprise User  no-change  no-change         no-change  Yes
Student          no-change  no-change         no-change  Yes
Staff            no-change  no-change         no-change  Yes
Printer          VLAN200AC  no-change         b@ac       Yes
Unregistered     VLAN200AC  no-change         b@ac       Yes
Guest            VLAN200AC  no-change         b@ac       Yes
Extreme          VLAN200AC  no-change         b@ac       Yes