ExtremeWireless - BYOD Lab - 1

From the following posts, I will introduce how to deploy BYOD by using Extreme Product..

Here is hardware for this BYOD Lab.

• ExtremeWireless AP 
• In this Lab, I use ExtremeWireless  Access Points 3705
• ExtremeWireless Controlle
• In this Lab, I use visual wireless controller v2110 which version is 09.21.09.0004 
• Extreme Network Access Controller(NAC)
• NAC version is 7.0.3.12
• ExtremeManagement
• Its version is 7.0.3.12
• Windows Servers 
• In this Lab, I use windows server 2008 and I installed DHCP server, NTP server, and Radius Server
• Extreme Switch
• In this Lab, I use summit x440 which could provide POE
• Wireless Clients
• Network Cables 

You could see the ExtremeNetworks products from the following URL

Here is the topology for this Lab

As the first steps, we configure syslog and NTP server as the basic configuration for Wireless Controller. 

Syslog Log Configuration: 

Information level is the lowest level and Critical is the highest level.

You could also use the following commands to confirm syslog information from EWC CLI

EWC1.wirelessdeom.com# show syslog

syslogip 1  192.168.10.11 enable

no svcmsg

no audmsg

stationevents disabled

facility application 0

EWC1.wirelessdeom.com# show loglevel

AC Log level: Information (4)

AP Log level: Information (4)

Report station session events on controller: enable

Forward station session events as traps: enable

Send station session events to NetSight: enable

Network Time Settings 

Network time is synchronized in one of two ways: Using System Time by manually setting the time on your Wireless Controller or using Network Time Protocol (NTP), an Internet standard protocol that synchronizes client workstation clocks. 

You could also use the following commands to confirm syslog information from EWC CLI

EWC1.wirelessdeom.com# show time

Tue Nov  1 10:51:02 JST 2016

EWC1.wirelessdeom.com# show time-config

ntp: using external ntp server

ntpip 1 192.168.10.12

ntpip 2

ntpip 3

tz Asia/Tokyo